Breaking News

Minimalist Electric Fireplace

Jenni Radosevich of I SPY DIY has needed a fire ever since they moved into their dwelling. In only a few days, Jenni reworked her lounge right into a heat and welcoming area by including a minimalist electrical hearth.

Minimalist Electric Fireplace

Hi, I’m Jenni from I SPY DIY and excited to be again with one other venture for The Home Depot! Ever since we began renovating our new home, my hub and I pictured a fire in the lounge. It’s the very first thing you see if you stroll within the door, and we knew it might add a attraction to this 140-year-old dwelling. Sadly, the unique hearth was proper within the middle of the kitchen, so we needed to demo the chimney in the course of the renovation. We went forwards and backwards about getting a fuel or electrical hearth, and ended up going with an electrical hearth due to the super-slim profile, which is nice for the small dwelling area (the hearth is lower than 10” deep), plus we didn’t must run any fuel traces or open any partitions, which made this a fast venture that we might have carried out earlier than the vacations! I’m IN LOVE with the way it turned out!! And assume it provides a lot heat to the lounge.

The fundamentals: A couple of issues earlier than you begin!

The venture took about 5 days to finish engaged on it for round 2 hours every day. The supplies value roughly $150 and the hearth insert was $300. We went with an electrical insert as a result of we needed a shallow profile, this insert is simply 8-in deep. I’d not suggest this tutorial in case you are utilizing a fuel insert. Our electrician put in a 3-prong outlet on the ground to plug within the electrical hearth, examine the necessities on the insert you decide. We hid all of the cords throughout the wall, and they are often accessed by pulling out the insert. And we use The Frame TV, which lays flat to the wall and appears like artwork when it’s off. The is a elements field that we hid behind the TV, and we simply have Netflix and Hulu so there isn’t any cable field.

Ok, right here we go!

Project Supplies:

2x4s

Sheetrock UltraLight half of in. x Four ft. x Eight ft. Gypsum Board

SHEETROCK Brand All-Purpose 1.75 Pt. Pre-Mixed Joint Compound

Grip-Rite #6 x 1-1/Four in. Philips Bugle-Head Coarse Thread Sharp Point Drywall Screws (1 lb.-Pack)

USG SHEETROCK Brand 250 ft. Drywall Joint Tape 382175

12 in. Plastic Drywall Mud Pan

Wal-Board Tools 6 in. Hammer-End Joint Knife

DEWALT Fixed Blade Utility Knife

Grip-Rite 2-1/2 in. Construction Screw (1 lb.-Box)

Drill

GE Supreme Paintable Silicone 10.1 oz. White Window and Door Caulk

10 ft. Vinyl Corner Bead

3M 16.6 oz. Drywall Corner Bead Adhesive Spray

BLACK+DECKER 2.4 Amp Corded 5 in. Random Orbital Sander

Classic Flame 36 in. Traditional Built-in Electric Fireplace Insert

Step 1

First, we measured the wall and sketched up the scale based mostly off my in-law’s hearth. Then started establishing the again body on the ground with 2x4s and wooden screws.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

Step 2

After constructing the again body, we put in place by screwing into the ceiling stud and the ground.

Step 3

A pair notes:

We reduce out the baseboard so it might match tight to the wall.

There are two studs to hold the TV as a result of we needed choices for the peak

We ended up including a third horizontal piece to set the TV elements on.

Ignore the additional items of wooden on the bottom, that was a measuring miscalculation!

Step 4

Next, we constructed on the entrance body, and connected to the again body with 8.5” items of 2x4s.

Steps 5 & 6

Note: We set the insert in place to verify it was deep sufficient to suit earlier than screwing within the entrance body.

Not proven: We added a 2×Four on the entrance body above the insert to carry into place, necessary as a result of you’ll screw the drywall into it.

We pulled the thermostat wire for the hearth out between the 2x4s on the appropriate facet so we might entry it after drywalling.

Plug in your TV energy earlier than drywalling, you might have to drill holes within the 2×Four body to string cords by means of to get to energy supply.

Step 7

Attach wooden mantel by screwing in from beneath. I had this piece of stay edge wooden that labored completely. But you could possibly additionally use barn wooden, simply ensure you issue within the thickness of the mantel if mounting a TV.

Step 8

Time to drywall! Measure, then use a sq. to mark in your sheetrock. Score both sides with a utility knife to chop out.

Step 9

Attach by screwing every bit into the studs with drywall screws.

Note: Make positive the top of the screw finally ends up slightly below the floor of the drywall so you may cowl up with mud.

Step 10

You can see the place we reduce out an area for the TV elements, and a gap for the thermostat wire.

Step 11

We drywalled proper as much as the wooden as a result of I needed it to appear like it was in-built to the hearth.

Step 12

Next, time to mud!

Step 13

I discovered these vinyl corners tremendous simple to make use of. I began by reducing a bit to suit.

Step 14

Next spray each of the inside sides with nook bead adhesive.

Step 15

Then spray each facet of the nook.

Step 16

Push your piece into place, utilizing your fingers or a software to verify it adheres.

Step 17

Fill your pan up with mud and knead it with the knife to get air bubbles out. Working your means from the surface into the nook, begin spreading the mud to cowl the nook.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

Step 18

You will want 2-Three coats to fully cowl the nook piece. I let every layer dry a day.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

Step 19

I needed a plaster look, so was liberal with the quantity of mud I used and was not involved with texture.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

Step 20

I lined the entire hearth with one layer of mud, and the nail holes and corners with 2-Three layers.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

Step 21

After all of the mud has dried, I sanded down among the texture and the corners with an orbital sander. I left among the texture to present it the look of plaster.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

Step 22

Next use paintable caulk across the mantel and the place the hearth touches the wall and ceiling.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

Step 23

After caulking the nook, run your finger to easy it down flat.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

Step 24

Last step is portray the hearth! I taped off the mantel and painted on two coats of Behr Cotton Knit in a matte end.

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

DONE!

Jenni Radosevich of I SPY DIY transforms her living room into a warm and inviting space by adding a minimalist electric fireplace.

For extra lounge inspiration, take a look at The Home Depot weblog.

The put up Minimalist Electric Fireplace appeared first on The Home Depot Blog.

Original supply: https://blog.homedepot.com/minimalist-electric-fireplace/

Check Also

Advantages of Hiring a Plumber for Minor Plumbing Points

Some plumbing points current themselves as fast fixes that may be resolved with a visit …

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.