Breaking News

How To Tile A Basement Shower

In just a few easy-to-follow steps, Natalie Dalpias of The Creative Mom shares the right way to create a bathe stall that’s purposeful, but trendy for his or her new basement lavatory.

How To Tile A Basement Shower

Hey, it’s Natalie, from The Creative Mom. I’m so excited to indicate you the right way to construct and tile a basement bathe. I’ll stroll you thru each step of the method from sheetrock, to bathe pan, to tile. Installing the bathe is the very first thing we did in our basement lavatory. To observe together with the entire lavatory course of, you’ll be able to try my weblog, The Creative Mom.

Supplies:

P-trap
Kerdi Shower Kit
Unmodified Thinset
 (to put in the Kerdi system)
Pfister Venturi
 Shower Faucet
Penny Tiles
Tile Wet Saw
Tile Trowel
Thinset
 (to put in tile)
Fusion Pro grout
1/8″ tile spacers
2 foot stage
Angle Grinder
Corner Shelves

3×12 Daltile Subway Tiles
Grout Float
5 Gallon Homer Bucket

Tile sponges

Directions:

Step 1: Prepare Shower Stall

We thought-about utilizing a bathe insert for our basement lavatory, however since our bathe stall wasn’t a normal dimension, we determined to tile it. We began with a sheetrocked bathe stall and concrete flooring. These directions may even work with a wood sub flooring.

Step 2: Prepare Plumbing

You will wish to be sure your plumbing is so as earlier than you begin engaged on the bathe stall. When we constructed our residence, we stubbed in a bathe drain and tap, however we didn’t have a P-trap, so earlier than we may get the bathe put in, we would have liked to get a P-trap put in. It did contain breaking out just a little concrete, nevertheless it was simply patched with some fill gravel and concrete earlier than we began putting in the bathe stall. You’ll additionally wish to be sure the plumbing to your bathe head is able to go. The valve we would have liked got here with our Pfister Venturi bathe head.

Step 3: Prepare Shower Pan

We had two huge considerations with placing in our basement bathe. The first was the bathe pan- we have been frightened placing in a bathe pan by ourselves as a result of we weren’t positive the right way to get the slope and drain good. The different concern was waterproofing- we weren’t positive what product can be finest for waterproofing.

We have been excited once we discovered the Schluter Kerdi system on HomeDepot.com, as a result of it solved each of our huge issues on the identical time! The Kerdi system has a pre-formed bathe pan, so we didn’t have to fret about placing in cement and ensuring our slope was good.  It additionally got here with a preformed curb, which was an enormous plus!

And if you’re questioning what’s in our drain, it’s a baseball- the right resolution to maintain fumes from arising by way of the drain. Once we have now water going within the bathe, it can sit within the P entice and stop fumes. Until then, we discovered {that a} baseball did the trick.

Step 4: Waterproof

Our different concern, waterproofing, was taken care of too. We have been particularly involved with waterproofing across the bathe head and deal with, and the way to ensure the drain met with the slope of the bathe correctly.  The Kerdi system got here with waterproofing material, seals for the bathe head and deal with, and even a drain that match completely with the bathe pan. All of it labored collectively like a allure!

We simply felt just like the Kerdi equipment actually solved all of our issues. The Home Depot additionally sells waterproofing choices like Red Gard and PVC bathe liners, if this Kerdi system doesn’t offer you all of the pleased feels prefer it did us. I’m not going to stroll you thru the set up strategy of the Kerdi bathe equipment, as a result of Schluter has such an excellent step-by-step video, that I believe it’s finest to observe that video very intently for finest outcomes.

Step 5: Tile Shower Floor

Once the bathe pan and partitions have been put in and every thing was waterproofed, we have been in a position to begin tiling. We began with the bathe flooring. Because I didn’t wish to have to chop tiles to match the slope of the bathe pan, I used these lovable little penny tiles. Installing them was very easy. I began by reducing one fringe of the tiles with my moist noticed, so the sting was sq. and even.

Then I began laying within the again nook, working my manner throughout the again wall after which ahead. You will unfold a layer of thinset with the notched aspect of your trowel, then lay your tile. Take your time on these penny tiles. Because you don’t use spacers, you’ll must be very deliberate and cautious to ensure every thing stays straight and stage. You’ll additionally want to chop the tile to suit your drain. We used an angle grinder to chop the tiles so that they match completely across the drain.

Step 6: Tile Shower Curb

After our flooring tile was laid, we minimize some Schluter tile edging to match the size of our curb and up the perimeters of our partitions.

Make positive you get the appropriate thickness of tile edging- our penny tiles have been half″ thick, whereas our wall tiles have been 3/8″ thick, so we needed to get completely different tile edging to match the tile we have been utilizing. We set the Schluter tile edging with our thinset, after which tiled proper as much as the perimeters with our penny tile. I believe the Schluter tile edging makes all of the distinction in the way in which the tile seems to be if you’re achieved.

Step 7: Tile Walls

We let our flooring and curb set in a single day so we may stand on it to tile the partitions. Once we have been able to tile the partitions, we put down some cardboard so we didn’t drip thinset on our flooring tiles. We used 3×12 Daltile Subway Tiles in brilliant white for our partitions. The worth on these tiles was so good! They give loads of bang for his or her buck. We began by laying the again wall. We centered our first tile within the middle of our again wall, then we tiled out and up from there.

You will unfold a layer of thinset with the notched aspect of your trowel, then lay your tile. Make to maintain the tiles stage. Since the bathe pan is sloped, you wish to be sure you use a 2 foot stage, and verify once in a while to be sure you are retaining your tiles stage. We used 1/8″ tile spacers to maintain our tiles spaced and even.

You’ll wish to begin on the wall you have a look at straight on, then transfer to your aspect partitions, that manner you gained’t see your grout strains. So after we obtained our first row achieved on our again wall, we moved to our aspect partitions. Since we didn’t actually care if the tiles on these partitions have been centered, we began with half of a tile and labored our manner outward. Then on the following row, we began with a complete tile. We continued that sample upward.

Step 8: Add Shelves

One of the benefits to constructing your individual bathe is which you could add as many cabinets as you need! And you recognize what I all the time say, “a shower can never have too many shelves”- simply kidding, I by no means say that. But actually, I do like loads of cabinets within the baths so cleaning soap and shampoo bottles don’t find yourself on the ground.

We put in three of those cool nook cabinets. I’m not going to lie, I used to be intimidated by these cabinets after I first noticed them. They are fairly heavy responsibility, and I assumed there was no manner they have been going to remain on the wall with simply thinset. But I used to be incorrect! They are actually superb and tremendous straightforward to put in.

The shelf really sits on the tile beneath it, and the tile above it slides behind the shelf, so it stays put! When we obtained to the row the place we needed the shelf, we put in the shelf first, with a layer of thinset, then tiled the row assembly as much as it. That manner we knew precisely what dimension to chop our tile. We did have to chop a few tiles in type of an L-shape to have it match as much as the shelf, however the coolest half is that the tile slides in behind the shelf, so you’ll be able to’t see the sting of the minimize tile behind it.

Our backside shelf was put in about 2 ft from the bathe flooring, and the highest cabinets simply shy of Four ft from the bathe flooring.  We have been huge followers of these cabinets.

Step 9: Cut openings for Faucet and Shower Head

Eventually you will want to chop out the opening to your faucet and bathe deal with. We used an angle grinder to chop the tile to the form we needed BEFORE we put the tile on the wall. The Home Depot additionally sells diamond gap saws, however we weren’t frightened about making it fairly, since our faucet deal with has a giant plate to cowl any errors we made. You’ll must do the identical factor to your bathe head.

Continue tiling till you get to the peak you need your bathe. Since our basement ceilings aren’t very excessive, we knew we needed our bathe to go to the ceiling. We needed to minimize the final tile to suit as much as the ceiling. If you aren’t tiling as much as the ceiling, I counsel ending off your edge with Schluter tile edging.

After I paint the ceiling, I’ll apply a layer of caulk the place my ceiling meets my tile. That manner, we all know the seam is watertight and we don’t have to fret about water or vapor getting behind the tile on the prime. You can get caulk that matches your grout, so that can assist it look very nice on the prime. But like I stated, that can wait till after I paint the ceiling, which I didn’t do but, as a result of I knew I’d most likely get grout and thinset on it.

Step 10: Grout

Let your tile sit in a single day to dry fully earlier than you begin grouting. You’ll want grout (after all), a grout float, a 5 gallon homer bucket of unpolluted water, and a sponge. I swear by these sponges with the scrubber factor on one aspect. It actually helps if you happen to let the grout sit for just a little too lengthy earlier than wiping it off.  I additionally used premixed Fusion Pro grout in Natural Gray (#09).  I made a decision to go together with this grout as a result of it by no means wants sealing, which is so good! And I went with the premixed, as a result of I needed to make certain I had the appropriate consistency.

Please word that I’m an extremely messy grouter- my complete grouting course of may have gone so much sooner if I’d have stayed cleaner with my grout.

When you might be grouting, you wish to begin along with your partitions first, then go to your flooring. Basically you smear the grout on along with your float and ensure it smooshes into your areas between the tiles. Then you go behind and wipe the surplus grout with a clear, moist sponge. You’ll wish to be sure you preserve your water and your sponge clear. Once you have got your tile fairly clear, you’ll be able to let the grout sit for just a few hours and treatment. Then return with a clear, moist sponge and provides it a extremely good wipe down. If you didn’t get the Fusion Pro grout, you’ll have to seal it after the grout cures fully.

Make positive you grout proper as much as your Schluter tile edging. You’ll wish to be sure there aren’t any gaps in any respect. Also, the grout will keep on with the Schluter tile edging, so be sure to wipe it down rather well whereas it’s moist, otherwise you’ll spend loads of time scraping dried grout off later. Don’t ask me how I do know that! haha!

And be sure you clear your corners out rather well. Your grout will are likely to pool within the corners, so use a putty knife or the nook of your float to get the surplus grout out of the corners and out from beneath the cabinets.

Step 11: Install Shower Head

Once your tile is completed, you’ll be able to set up your bathe head and deal with. I used the Pfister Venturi in Black, and it’s SOOO good!

After you’ve put in your bathe head, verify for leaks within the fittings, let your grout treatment for at the least a day or two, and luxuriate in your new basement bathe!

This was step one in our basement lavatory set up. Now we’re prepared for paint, flooring, vainness and a bathroom!

Thanks for following alongside on this venture. You can discover extra DIY’s like this, in addition to see all the ending touches for this lavatory on my weblog, The Creative Mom. You also can observe me on PinterestInstagram, Facebook, or Twitter.

For extra lavatory design concepts, try The Home Depot Blog.

The submit How To Tile A Basement Shower appeared first on The Home Depot Blog.

Original supply: https://blog.homedepot.com/tile-basement-shower/

Rate Our Article

User Rating: Be the first one !

Check Also

Three Methods to Make Your Home Really feel Model New Once more

You may discover that the thrilling feeling you as soon as felt whenever you explored …

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.