Conserving water at dwelling could be a straightforward activity in line with Vineta Jackson of The Handyman’s Daughter. Read on to search out out precisely the way to preserve water at dwelling with a rain barrel set up.
How to Install a Rain Barrel
Seattle will get a whole lot of rain within the winter and spring, however goes right into a drought interval in the course of the summer season. It appeared like such a waste to dump all that water down the drain, when it might be saved for the dry months as a substitute! I’ll present you the way to set up a rain barrel in your current downspout, so it can save you your rainwater for a not-so-rainy day!
- Rain barrel
- This is the one I selected, however there are many kinds and choices on the Home Depot web site!
- 48” lengthy stage
- Concrete pavers
- Tape measure
Step 1 – Choose a Location
When selecting a location in your rain barrel, needless to say it must be inside a number of toes of a downspout. Mine might be positioned in a uncared for nook of the entrance yard, the place will probably be out of the best way but simply accessible.
Step 2 – Level the Ground
A rain barrel can weigh a whole lot of kilos when full, so the bottom beneath it must be secure and stage.
There have been already some concrete pavers on this spot, however they weren’t stage anymore. I pulled them out and crammed within the low spots with extra soil. After compacting the dust, I changed the pavers and checked that it was stage.
Elevate the Rain Barrel for Easy Access (Optional)
The spigots on a rain barrel are positioned on the backside, which makes it troublesome to fill a watering can! Consider elevating your rain barrel on a stand for simpler entry, and elevated water stress.
You can discover plastic variations like this one, or make your personal! You can discover the tutorial and plans for my DIY rain barrel stand right here.
Drill Holes for Drain Pipe
After figuring out the peak of your rain barrel (with or and not using a stand), it’s time to attach it to your downspout.
Lay the extent throughout the highest of the rain barrel with one finish pointed on the downspout. Make positive that bubble is within the center!
Mark the place the top of the extent meets the downspout with a pencil. Then measure down three inches and mark the middle.
My rain barrel got here with every part I wanted to put in it, together with the outlet saws! Drill a gap into the facet of the downspout with the two ⅛” gap noticed.
On the rain barrel, there are two totally different spots the place you possibly can drill a gap for the opposite finish of the drain pipe. Pick the one closest to the downspout and drill a gap with the 1 ½” gap noticed.
Insert Diverter and Connect to Rain Barrel
The diverter redirects some, however not all, of the rain off the roof into the barrel. When it’s full, water will bypass the gathering cup contained in the downspout and proceed down the drain. Pretty slick!
The diverter matches snugly within the downspout, so it takes slightly coaxing to get it into place. Once it’s in, safe it with the included screws.
A versatile hose connects the diverter to the rain barrel. Make positive it’s not sagging or rising above the diverter for correct water movement.
Pop on the Lid and Wait for Rain
This lid doubles as a planter, so within the spring I’ll be filling it with colourful annuals that spill over the perimeters of the barrel. For now, the lid is locked into place to forestall leaves and bugs from discovering their means inside.
I didn’t have to attend lengthy earlier than it began to rain. There was already a gallon or so within the backside of the barrel the following morning!
I added a second rain barrel to the yard to double the output. When the climate dries out, I’ll be capable of maintain my crops proud of free water!
Read the Home Depot Blog for extra Outdoor Living concepts.
The publish How to Install a Rain Barrel appeared first on The Home Depot Blog.
Original supply: https://blog.homedepot.com/how-to-install-rain-barrel/