Breaking News

DIY Closet Doors

Cara Irwin of Goldalamode focuses on inside design, DIY and way of life running a blog. Check out how Cara places her design abilities to the check on this step-by-step DIY closet doorways tutorial.

DIY Closet Doors

If you’ve some doorways in your house that you simply need to substitute then you definately’re in the appropriate place. I’m working with The Home Depot to tackle a DIY closet door undertaking! If you go searching, you’ll in all probability notice you don’t just like the doorways round your own home. Odds are they’re beat up OR you simply need one thing somewhat extra thrilling. I feel the doorways needs to be an extension of your own home’s model and general vibe.

I’ve turn out to be an enormous fan of the “Parisian apartment” look. Closet doorways will be SUPER costly although if you would like them to have some character. My new factor is creating the look I would like, however for half the associated fee. I like doing this to closet doorways particularly as a result of they’ll add to no matter model you’ve happening in that room.

For our visitor room we had a double sliding door. The doorways themselves had been actually beat up with scratches and dings throughout them. The monitor on the high was HIDEOUS (splattered in all totally different coloured paints from earlier house owners). They didn’t slide simply they usually had been actually wobbly. On high of the beauty issues, I simply wasn’t an enormous fan of the sliding doorways. I wish to open the doorways vast open to seek out what I want to seek out. This could also be #impatient, however that’s okay!

To give our visitor room closet some character and hold the associated fee down, we purchased plain wooden doorways and customised them with molding and {hardware}. If you look on Pinterest you will discover some actually cool door designs. Let’s get began and I’ll present you ways you are able to do this DIY closet doorways undertaking to your individual doorways!

What you’ll want:

(Tip: print this for a examine checklist!)

Doors – We went with a plain wooden door with a view to customise it. Each door runs about $35.

Molding – There’s a whole aisle of molding to select from at The Home Depot. You can select any design you need. There’s additionally totally different measurement doorways. You can even use this identical apply on plain bi-fold doorways. I selected this one.

Hinges – You can both do 2 or Three hinges. We went with Three black hinges.

Door knobs – You can go along with a “dummy doorknob” for these sing you wont be locking them. You’ll use the ball catch on the high to maintain the doorways closed. We additionally went with black for this so that every one of our {hardware} matches.

Paint – I often use Behr, however for this particular undertaking I used “Natural White” by Glidden. I feel I’d get pleasure from Behr just a bit extra solely as a result of the Glidden was somewhat thick and sticky. Behr all the time goes on actually clean and blends rather well. I ended up LOVING the colour although.

Primer I recommend utilizing primer first as a result of the plain wooden door is extraordinarily porous. If you go straight on your paint you’re going to finish up doing 7 coats of paint. I went with water-based Kilz2 Latex. Primer has a extremely sturdy odor to it so I recommend utilizing it exterior. If you need to do it inside, go for the odorless one.

Paint brushes + rollers – You’ll want two brushes, one for the paint and one for the primer. You’ll want these to get within the crevices of the molding. I recommend getting a less expensive brush for the primer solely as a result of it tends to get ruined somewhat quicker. For the rollers I all the time go along with the small foam rollers. The foam rollers make the paint go on actually clean and also you wont see any brush strokes. Make certain you employ the froth curler white the comb strokes are nonetheless moist so you possibly can eliminate them. You might use a big curler for the again of the door.

Wood filler – We used Plastic Wood. This is to fill within the holes the place you nail the molding it. It can all the time assist fill the corners the place the lower items of molding match up.

Wood glue – You can any wooden glue to connect the molding however we used Titebond.

Skilsaw – A skilsaw goes to be essential to measurement your doorways to suit your openings. They’re not THAT costly however it’s an important software to have round.

Ryobi Door Hinge Template – This is one other essential software on your undertaking. The wooden doorways don’t include hinge lower outs so you need to create them. You will use this alongside together with your router.

Ryobi Router – This is the opposite software you’ll use together with the Ryobi door hinge equipment to type the lower outs on your hinges.

Nail gun – A nail gun can be an important software to have in your house for DIY initiatives. We use this one ALL THE TIME. We hooked up the molding to the door with wooden glue and adopted it up with the nail gun for additional maintain.

Ball catch – The ball catch goes to be locations on the high of your doorways. This is what retains the doorways closed. We obtained black to match the remainder of our {hardware}.

Screw Gun

Measuring Tape

T-square

Miter Saw – So this software is somewhat little bit of an funding. I feel it’s such an essential factor to have in your house although. If you’re planning on doing any DIY initiatives at house you’ll proabably end up needing one among these. We used this to chop our molding items on a 45 diploma angle.

BEFORE:

Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial.

STEPS:

  1. Take measurements of your present opening.
  2. Head to your native Home Depot and seize your supplies listed above
  3. Use your Skilsaw and monitor that retains it nonetheless to trim off the surplus quantity of the door that’s too large.Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial.
  4. Using your measuring tape and t-square learn the way you need to place your molding.
  5. Cut the molding utilizing your miter noticed on a 45 diploma angle. You can use 2 items as a information as an alternative of measuring each single piece.
  6. Use your wooden glue and nail gun to connect the molding to the door.
  7. Create hinge lower outs together with your Ryobi hinge equipment template and Ryobi router. You can even hand carve the hinge lower outs however this is likely to be somewhat simpler.
  8. Figure out the place you need to place the door knob. We positioned our door knob 37″ off the bottom. Of course this could change give or take.
  9. Now you’ll want to drill a gap for the ball catch. This is to maintain the doorways closed. You can use a drill and wooden bit to carve the outlet.
  10. Do not connect any of the {hardware} but as a result of it’s time to prime. I used Kilz2 Latex water based mostly primer. I don’t like to make use of the oil based mostly after I’m portray as a result of it will probably change the colour of your paint after time. The primer does have a really sturdy odor to it so both paint exterior or purchase the odorless primer.
  11. I used Glidden “Natural White” for this undertaking. Usually I take advantage of Behr from The Home Depot, although. I feel the Behr goes on somewhat bit smoother however I like the colour of the Natural White.
  12. You can measure the place to place your hinges on the door body now. Some individuals use 2 hinges however we used 3. You can have a look at the remainder of the doorways in your home to get reference on variety of hinges and measurements.
  13. Install your doorways!
  14. Attach door knobs!
  15. Install ball catch.
  16. Install door cease. Shut your doorways till they’re flush and then you definately’ll know the place to place your door cease.
  17. DONE!

AFTER:

Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial. Cara Irwin of Goldalamode puts her design skills to the test in this step-by-step DIY closet doors tutorial.

I hope you loved this tutorial weblog publish! Hopefully you’re tremendous impressed to go to your native Home Depot and get began by yourself DIY closet doorways! Have enjoyable!

For extra inspiration on the way to revamp your closet, take a look at these concepts on The Home Depot weblog. Find extra distinctive doorways on your closet at The Home Depot.

The publish DIY Closet Doors appeared first on The Home Depot Blog.

Original supply: https://blog.homedepot.com/diy-closet-doors/

Check Also

How To Adorn Your Entertainment Room On A Finances

Entertainment rooms are an important place to calm down and unwind after a protracted day. …

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.