Industrial Chic Closet Bookshelves
My daughter, Riley, and I share a Mommy + Me workplace that we love. Over the years, we’ve styled it to suit our personalities, however the one space that hasn’t gotten any love is our closet. It’s turn out to be a dumping floor for books and different miscellaneous gadgets that don’t have a house.
We knew that the closet was lengthy overdue for a makeover, so we determined to put in DIY bookshelves. I used to be impressed by my time residing in New York City to present the house an industrial stylish look, so we used peel-and-stick wallpaper for the gorgeous uncovered brick backdrop and poplar boards supported by ornamental plumbing pipes for the open idea cabinets.
Both the wallpaper calculator and the purchase on-line, choose up in retailer possibility on HomeDepot.com made it really easy to get every little thing that we wanted to carry our undertaking to life!
- Newport Reclaimed Brick Peel and Stick Vinyl Strippable Wallpaper
- Wallpaper Smoother and Utility Knife Kit
- Oil-Rubbed Bronze Spray Paint
- ½ in. Floor Flanges
- 10 in. Pipe Connectors
- ½ in. Pipe Caps
- 2 in. Wood Screws
- 1 in. x 10 in. x 6 ft. Poplar Boards
- Sanding Sponge
- Clear Matte Finish Polyurethane
- ¾ in. Pipe Straps
- ¾ in. Wood Screws
- Painter’s Tape
- Stud Finder
- Tape Measure
Step 1: Measure and Prep the Space
Use a tape measure to measure the scale of the wall(s).
Use the Home Depot wallpaper calculator device to calculate the variety of rolls that you just’ll want in your house.
Helpful Tip: It’s a good suggestion to find out the place you need the cabinets to be whereas the wall remains to be naked. I used a stud finder to determine the place the studs are within the wall, which helped me decide that I wanted my cabinets to be no less than 6 ft. lengthy given the spacing of the studs. I made a decision on 5 6-foot cabinets, every 13 inches aside. Then, I used these measurements and a degree to create a mock-up on the wall with painter’s tape in order that I may visualize how the cabinets would look earlier than I hung them.
If wanted, clear partitions with heat cleaning soap and water to take away any mud or particles. Let dry utterly earlier than putting in.
Step 2: Install Wallpaper
Unroll one the primary roll of wallpaper on the ground to the size wanted for the primary panel, including about 2-Three further inches on the backside that you’ll trim later. Cut this piece and put aside.
Next, unroll the remaining roll to seek out the place the sample traces up with the primary panel. From this level, measure the size wanted for the wall, including about 2-Three inches at each the highest and the underside that you’ll trim later. After measuring, reduce this piece from the roll and put aside.
Repeat the earlier step for the remaining panels.
If attainable, use two individuals to carry out the next steps.
Using a ladder, line up the highest of the primary panel of wallpaper with the place the wall and ceiling meet on the prime of the left or proper nook of the closet (whichever is best!).
Starting from this level, slowly peel off about 3-Four inches of the backing and begin sticking the wallpaper to the wall. It’s useful if one individual un-peels and sticks on the prime whereas the opposite individual holds the underside of the panel and guides as vital.
Use the wallpaper smoother to clean out any bubbles and/or wrinkles as you go. Slowly proceed this course of down the size of the wall, making any changes as wanted.
Since my wallpaper has bricks, I used a degree to ensure that the rows had been at the same time as I labored my means down. Once you attain the underside, use the utility knife to trim the surplus on the backside.
Position the second panel on the wall subsequent to the one that you just simply hung and observe the place the sample meets (do not forget that it’s best to have just a few further inches on the prime). Once you discover this level, peel off the backing and repeat the earlier step. Once you end, use the utility knife to trim the surplus on the prime and backside.
Repeat the earlier step for the remaining panels.
Step 3: Prepare the Shelves
Spray paint the plumbing items (pipe connectors, flanges and caps), all screws, and pipe straps in order that they’re all one coloration. Let dry utterly.
Sand the boards (I had mine reduce on the retailer). If desired, stain and/or end the boards with the clear matte polyurethane to maintain the pure look. Let dry utterly earlier than making use of the subsequent coat. Set apart as soon as completed.
Step 4: Hang the Shelves
Use the measurements that you just took earlier than putting in the wallpaper and the extent to find out the location of the primary shelf. Then, use the stud finder to find the primary stud and mark this spot.
Place a flange over the stud mark that you just made within the earlier step. Double-check the location with the extent and mark 4 holes to drive the two in. wooden screws into the stud utilizing the drill.
Repeat this course of for the remaining flanges on the row.
Once the flanges are hooked up to the wall, screw within the pipes till safe.
Screw the caps on the ends of the pipes.
Place the board on prime of the put in pipes. Secure the board to the pipes utilizing a pipe strap and two ¾ in. wooden screws. Note: I solely opted to connect pipe straps to the top pipes for aesthetic functions (the boards solely want one strap to remain in place), however you possibly can add a further straps to the opposite pipes if desired.
Repeat this course of for every row to complete the cabinets.
Step 5: Add Decor
To full the look, Riley and I used a number of industrial-themed items to fashion the cabinets, together with brass-finished bicycle bookends and ornamental jacks in distressed gold, each out there on HomeDepot.com.
I’m so happy with how our industrial stylish closet bookshelves turned out! Each time I open the closet, I really feel like I’m in a beautiful New York loft. Best of all, Riley and I are a lot extra organized and may say that we really love our complete house—no extra operating to shut the closet when we now have guests!
The publish Bookshelf Closet Makeover appeared first on The Home Depot Blog.
Original supply: https://blog.homedepot.com/bookshelf-closet-makeover/